logo - 刷刷题
下载APP
【简答题】

阅读理解。
There was a gardener who looked after his garden with great care. To water his flowers, he used two
buckets. One was a shiny and new bucket. The other was a very old and dilapidated one, which had
seen many years of service, but was now past its best.
Every morning, the gardener would fill up the two buckets. Then he would carry them along the path,
one on each side, to the flowerbeds. The new bucket was very proud of itself. It could carry a full
bucket of water without a single drop spilled (溢出). The old bucket felt very ashamed because of its
holes: before it reached the flowerbeds, much water had leaked along the path.
Sometimes the new bucket would say, 'See how capable I am! How good it is that the gardener has
me to water the flowers every day! I don't know why he still bothers with you. What a waste of space
you are!'
And all that the old bucket could say was, 'I know I'm not very useful, but I can only do my best. I'm
happy that the gardener still finds a little bit of use in me, at least.'
One day, the gardener heard that kind of conversation. After watering the flowers as usual, he said,
'You both have done your work very well. Now I am going to carry you back. I want you to look
carefully along the path.'
Then the two buckets did so. All along the path, they noticed, on the side where the new bucket was
carried, there was just bare (光秃秃的) earth; on the other side where the old bucket was carried, there was a joyous row of wild flowers, leading all the way to the garden.
1. What does the underlined word 'dilapidated' probably mean?
A. Dirty
B. Dark
C. Worn-out
D. Plain-looking.
2. What was the old bucket ashamed of?
A. His past.
B. His aging.
C. His manner.
D. His leaking.
3. Why was the old bucket still kept by the gardener?
A. Because it was used to keep a balance
B. Because it stayed in its best condition
C. Because it was taken as a treasure
D. Because it had its own function

题目标签:光秃秃溢出
举报
参考答案:
参考解析:
.
刷刷题刷刷变学霸
举一反三

【单选题】在定点运算器中产生溢出的主要原因是()。

A.
运算过程中最高位产生了进位
B.
运算过程中最低位产生了进位
C.
运算的结果超出了机器的表示范围
D.
寄存器的位数太多,不得不舍弃最高有效位

【单选题】定点数运算发生溢出时应该( )。

A.
输出错误信息
B.
舍人处理
C.
向左规格化
D.
向右规格化

【单选题】如果 ATF 从自动变速器的通气孔溢出 , 通常故障为( )

A.
自动变速器的 ATF 油面过高或通气孔堵塞
B.
油面高度不正确或自动变速器的工作温度过高
C.
自动变速器油温传感器损坏
D.
变扭器损坏

【多选题】影响溢出的关键因素有( )。

A.
外资的异质效应
B.
内资企业的发展程度
C.
技术的差距
D.
劳动力的素质

【单选题】膀胱过度充盈,压力增高,尿液不断溢出,提示

A.
张力性尿失禁
B.
压力性尿失禁
C.
真性尿失禁
D.
急迫性尿失禁
E.
充溢性尿失禁

【单选题】设两个8位补码表示的数b7 b6 b5 b4 b3 b2 b1 b0和a7 a6 a5 a4 a3 a2 a1 a0相加时溢出(b7、a7为符号标志),则( )。

A.
b7与a7的“逻辑或”结果一定为1
B.
b7与a7的“逻辑与”结果一定为0
C.
b7与a7的“逻辑异或”结果一定为1
D.
b7与a7的“逻辑异或”结果一定为0

【单选题】T0的计数溢出标志位是

A.
TCON中的TF0
B.
TCON中的TF1
C.
TCON中的TFR0
D.
TCON中的TFR1

【单选题】定时器/计数器T0工作于模式2,在计数溢出时()。

A.
计数从零重新开始
B.
计数从初值重新开始
C.
计数停止
D.
由程序决定
相关题目:
【单选题】在定点运算器中产生溢出的主要原因是()。
A.
运算过程中最高位产生了进位
B.
运算过程中最低位产生了进位
C.
运算的结果超出了机器的表示范围
D.
寄存器的位数太多,不得不舍弃最高有效位
【单选题】定点数运算发生溢出时应该( )。
A.
输出错误信息
B.
舍人处理
C.
向左规格化
D.
向右规格化
【单选题】如果 ATF 从自动变速器的通气孔溢出 , 通常故障为( )
A.
自动变速器的 ATF 油面过高或通气孔堵塞
B.
油面高度不正确或自动变速器的工作温度过高
C.
自动变速器油温传感器损坏
D.
变扭器损坏
【多选题】影响溢出的关键因素有( )。
A.
外资的异质效应
B.
内资企业的发展程度
C.
技术的差距
D.
劳动力的素质
【单选题】膀胱过度充盈,压力增高,尿液不断溢出,提示
A.
张力性尿失禁
B.
压力性尿失禁
C.
真性尿失禁
D.
急迫性尿失禁
E.
充溢性尿失禁
【单选题】设两个8位补码表示的数b7 b6 b5 b4 b3 b2 b1 b0和a7 a6 a5 a4 a3 a2 a1 a0相加时溢出(b7、a7为符号标志),则( )。
A.
b7与a7的“逻辑或”结果一定为1
B.
b7与a7的“逻辑与”结果一定为0
C.
b7与a7的“逻辑异或”结果一定为1
D.
b7与a7的“逻辑异或”结果一定为0
【单选题】T0的计数溢出标志位是
A.
TCON中的TF0
B.
TCON中的TF1
C.
TCON中的TFR0
D.
TCON中的TFR1
【单选题】定时器/计数器T0工作于模式2,在计数溢出时()。
A.
计数从零重新开始
B.
计数从初值重新开始
C.
计数停止
D.
由程序决定