下载APP
【单选题】
Tighten the nuts but do not torque them at this time.
A.
拧松螺钉，但同时不要给它们打力矩
B.
拧紧螺钉,但此时不要扭矩它们
C.
拧紧螺母，但此时不要给它们打力矩
举报
参考答案：
参考解析：
刷刷题刷刷变学霸
举一反三
【单选题】To establish the basis for those item s to be included, the following assumptions have been made. 为了确定列入这些项目的基础，我们作了下列假设。
A.
To found the basis for those items, the following conceptions have been made.
B.
In order to set up the basis for those items to be included, make the following assumptions.
C.
Do the following assumptions to build up the basis for those items to be excluded
【单选题】To remove the cover assembly (9. first remove the four screws (10)
A.
要先安装螺钉(10)，才能安装盖组件(9
B.
要拆下盖组件(9),首先要拆下这四个螺钉(10)
C.
要拆下螺母(9)，首先要拆下这四个螺栓(10
【单选题】Torquemeter is an indicating system that displays the output torque available on the propeller shaft.
A.
扭矩测量仪是一个显示螺旋桨传动轴可用输出扭矩的指示系统
B.
扭矩计可以显示传动轴的输出扭矩
C.
指示系统必须显示扭矩计传动轴的可用输出扭矩
【单选题】Troubleshooting information describing probable malfunctions, how to recognize those malfunctions, and the remedial action for those malfunctions shall be provided.
A.
如何识别这些故障，排故信息以及这些故障的补救措施应该提供
B.
此规章应提供可能故障的排故信息，以及对这些故障的补救措施
C.
应提供描述可能故障的排故信息，如何识别这些故障，以及针对那些故障的纠正措施
【单选题】Turn the knob to make the display go out of view
A.
转动凸轮以使显示器松脱
B.
转动旋钮使显示消失
C.
转动把手以使显示器不再显示
【单选题】Units, of measurements shown in manual must be consistent.
A.
手册中所示的度量单位必须准确
B.
手册中的度量单位必须一致
C.
手册中的度量单位必须写明
【单选题】Unless the manufacturer's instructions tell you differently, do the procedure that follows. 除非制造商的说明书有不同的说明，否则按照下面的步骤操作。
A.
Obey the following procedure if the manufacturer provides you different instructions.
B.
If the manufacturer instructs you differently the following procedure should be ignored.
C.
If the manufacturer's instructions are different from the following procedure, obey the following procedure
【单选题】use the manual procedure if it is not possible to use the automatic control
A.
如果无法使用自动控制，请使用人工控制程序
B.
用手动程序代替自动控制程序完成操作
C.
尽可能使用手动程序替代自动控制
【单选题】1061x Use the specified tool to seal the opening
A.
使用通用工具密封端口
B.
使用指定的工具封严开口
C.
端口可以使用特殊的工具封严
【单选题】Utilizing an airplane as intended oy the manufacture, combined with, sound, inspection and maintenance practice, forms the basis for assuring the airplane remains airworthy and safe to operate 利用飞机的目的...
A.
The basis for assuring an airplane remains airworthy and safe to operate is, to combine the manufacturer's requirement Switch sound inspection and maintenance practices.
B.
To ensure airworthiness and safe operation of an airplane, itis essential to follow the manufacturer's instructions in the utilization of airplane and perform sound inspection and maintenance practices as well.
C.
Airworthiness and safe operation are fundamental to aircraft utilization as required by the manufacturer, so sound inspection and maintenance/practices are carried out.